
Condor Microphone array - MT600
![]()
DESCRIPTION:
The Condor Beamforming Microphone Array was created with the goal of decluttering conference rooms. The Condor, featuring a built-in SIP phone, sits above or below your monitor, eliminating cumbersome devices and wires from the conference table. It can easily connect to any video conferencing system, and use any external sound bar or your monitor’s internal speakers.
The Condor is completely changing the look and dynamics of conference rooms.
- Highly directional, 48-inch aperture,
- 15-microphone array
- Seven fixed-direction directional beams with Constant Beamwidth design
- Pickup range up to 30 feet with optimal recommended range of up to 25 feet
- Angular reception – 180 degrees
- Algorithms: DSP based noise canceling, echo canceling. AGC, De-reverb
- 100% full duplex
- Digital interface using USB telephony protocol
- Analog interface for use with Analog Codecs
- Built-in IP phone (SIP)
- Automatic bridging between the IP phone and USB communication
Installations
The Condor comes with two installation
options:
- Wall mounting; the Condor comes with two wall mounting brackets
- Stands; two stands are provided to placing the Condor on a flat surface
- Brackets for TV Mount available (sold separately).
EACH UNIT INCLUDES:
- USB cable
- 5V power supply
- 2 wall mounting brackets and 2 stands
- USB – both data and power
- Analog Speaker In via two RCA jacks (left and right signals)
- Analog Speaker Out via two RCA jacks (left and right signals)
- Analog System Out (microphone output) via RCA jack (line level)
- Digital Speaker In via optical link (stereo)
- Digital Speaker Out via optical link (stereo)
- RJ45 Ethernet link – for network connection and IP phone
- Frequency response: 50Hz – 16KHz
- Noise Suppression: >15dB – no pumping noise
- Echo Canceling: >40dB with conversion rate >40dB/sec
- Residual echo suppressed to environment noise level preventing artificial ducking
- Low latency – 10Msec
- Power consumption – 500mAmp (from USB or POE)
- Supported Codecs:
G.711 (A-law and Mu-law)
G.729A (Annex B)
G.722
G.723
Dimensions
- 2.5” diameter, 48” long. Weight: 3.35 lbs
- The Condor is housed in a metal tube; the outer shell is metal for sturdiness and
durability.
VoIP and Signaling
- SIP –RFC 3261, SDP – RFC 2327 SIP over
- TCP/UDP, Redundancy, Digest
- Authentication, PRACK, Early Media
Data Protocols
- IPv4, TCP, UDP, ICMP, ARP, RTP, SRTP,
Static IP/DHCP IP Assignment, IEEE 802.1p/Q,
HTTP/HTTPS/DHCP,NTP, FTP/TFTP
- Plug-and-Play - No installation or additional drivers required
- Audio Setup Utility is available for Windows.
- Recording utility is available for Windows.
- Recording utility allows you to record conversations to your computer via the device.
- Operating systems: Windows 98 and up / Linux / MacOS.
Accessories
- USB cable
- 5V power supply
- 2 wall mounting brackets and 2 stands
Warranty
- Two Years.
Provisioning and Management
- Web Server for Configuration and Management, Configuration update via FTP, TFTP, HTTP, HTTPS, DHCP Options (66, 67, 160, 12, 77, 42)
- There are four light sources across the Condor, each includes blue and red LEDs. The red will be flashing when the unit is muted; the blue will indicate the direction of reception. They will also be used to indicate other activities like power up, programing, IP search, and so on.
Software and Controls
- The Condor will be identified and selected as the default device on any Windows
application. You may have to select it as your default device for MAC OS. - The IP phone (SIP) is set up using a web based GUI that can be logged in from any device sitting on the same network as the Condor.
Phoenix offers a few software control and support utilities on its website. These
include recording software, test wizard, and maybe the most important – an audio setup utility. You can control the Condor’s microphone and speaker volume using this utility. These volumes can be controlled separately for signals coming through the SIP link or the USB link.
Power
- USB Power
- PoE

