MT107MXL
DESCRIPTION:
The Conferencing Kit is a high quality conferencing solution that is delivered with ease of use in mind. Although simple to set up, this high quality kit ensures a superior enhancement in your conferencing experience. Pairing a high quality MXL pro-audio microphone with Phoenix Audio Technologies’ award winning advanced echo canceling capabilities and a powerful DSP, the conferencing kit achieves commanding performance that results in high-definition audio conferencing.
Similar Products
- Analog input & output through a standard 3.5mm jack
- Digital input & output through USB connection
- Utilize your own microphone and amplified loudspeaker (comes with an iBall microphone)
- Both microphone and far-end input connect through standard 3.5 mm stereo audio jacks
- Powered via USB (Power adapter with USB connector is available for purchase)
CONNECTIVITY - INPUT:
- Microphone input is connected to “IN 1”. Units are preset to line level with 6dB boost and phantom power off.
- Far-end input is connected to “IN 2”. Connect your system speakers output into this jack. Units are preset to line level.
- Note: Far-end input will be received through the USB channel if active.
CONNECTIVITY - OUTPUT:
- Output to room speakers is through “OUT 2”. Units are preset to line level.
- Far-end output to system is through “OUT 1”. Units are preset to line level.
- Note: Far-end output will be transmitted through the USB channel if active.
- 32KHz sampling frequency; 100Hz-16KHZ bandwidth
- Two level of echo canceling aggressiveness and three echo canceling speeds
- Controllable tail length of up to 240 ms.
- Three levels of noise reduction: 8dB (low), 14dB (Medium), and 20 dB (High)
- Residual noise is suppressed to room level to prevent pumping noise
- Eight preset color filters for both the output and speaker signal
- Low delay (10 ms)